7.9.6 Parameter Values 99
7.10 Examples
99
7.10.1 Read Coil Status (01 HEX) 99
7.10.2 Force/Write Single Coil (05 HEX) 100
7.10.3 Force/Write Multiple Coils (0F HEX) 101
7.10.4 Read Holding Registers (03 HEX) 101
7.10.5 Preset Single Register (06 HEX) 102
7.10.6 Preset Multiple Registers (10 HEX) 102
7.11 Danfoss FC Control Profile
103
7.11.1 Control Word According to FC Profile (8-10 Protocol = FC profile) 103
7.11.2 Status Word According to FC Profile (STW) (8-30 Protocol = FC profile) 104
7.11.3 Bus Speed Reference Value 105
8 General Specifications and Troubleshooting
106
8.1 Line Power Supply Specifications
106
8.1.1 Line Power Supply 3x200–240 V AC 106
8.1.2 Line Power Supply 3x380–480 V AC 107
8.1.3 Line Power Supply 3x380–480 V AC 111
8.1.4 Line Power Supply 3x525–600 V AC 113
8.2 General Specifications
114
8.3 Acoustic Noise or Vibration
117
8.4 dU/Dt
118
8.5 Derating according to Ambient Temperature and Switching Frequency
120
Index
126
Contents Design Guide
Danfoss A/S © Rev. 2014-01-14 All rights reserved. MG18C522
To Next Page
Loading...
