4 How to Order
4.1 Configuration
4.1.1 Drive Configurator
It is possible to design a adjustable frequency drive
according to the application requirements by using the
ordering number system.
Adjustable frequency drives can be ordered as standard or
with internal options by using a type code string, e.g.,
FC-101PK25T2E20H4XXCXXXSXXXXAXBXCXXXXDX
Use the Internet-based Drive Configurator to configure the
right adjustable frequency drive for the right application
and generate the type code string. The Drive Configurator
automatically generates an 8-digit sales number to be
delivered to your local sales office.
Furthermore, a project list with several products can be
established and sent to Danfoss sales representative.
How to Order Design Guide
MG18C522 Danfoss A/S © Rev. 2014-01-14 All rights reserved. 49
4 4
To Next Page
Loading...
