Danfoss VLT HVACDrive - Jog Speed [RPM]; Motor Speed Direction; Motor Speed High Limit [RPM]

3-19 Jog Speed [RPM]
Range: Function:
Application
dependent*
[Application dependant]
3-41 Ramp 1 Ramp-up Time
Range: Function:
Application
dependent*
[Application dependant]
3-42 Ramp 1 Ramp-down Time
Range: Function:
Application
dependent*
[Application dependant]
4-10 Motor Speed Direction
Option: Function:
Selects the motor speed direction required.
Use this parameter to prevent unwanted reversing.
[0] Clockwise Only operation in a clockwise direction will be allowed.
[2] * Both directions Operation in both a clockwise and anti-clockwise direction will be allowed.
NOTE!
The setting in par. 4-10
Motor Speed Direction has impact on the Flying Start in par. 1-73 Flying Start .
4-11 Motor Speed Low Limit [RPM]
Range: Function:
Application
dependent*
[Application dependant]
4-12 Motor Speed Low Limit [Hz]
Range: Function:
Application
dependent*
[Application dependant]
4-13 Motor Speed High Limit [RPM]
Range: Function:
Application
dependent*
[Application dependant]
NOTE!
Max. output frequency cannot exceed 10% of the inverter switching frequency (par. 14-01
Switching Frequency ).
7 How to Program the Adjustable Frequency
Drive
VLT
®
HVAC Drive Instruction Manual
7-22 MG.11.AB.22 - VLT
®
is a registered Danfoss trademark
7