Danfoss VLT HVACDrive User Manual

7.1.3 Changing Data
1. Press the [Quick Menu] or [Main Menu] key.
2.
Use [
▲
] and [
▼
] keys to find parameter group to edit.
3. Press the [OK] key.
4.
Use [
▲
] and [
▼
] keys to find parameter to edit.
5. Press the [OK] key.
6.
Use the [
▲
] and [
▼
] keys to select the correct parameter setting. Or, to move to digits within a number, use the keys. The cursor indicates the
digit selected to be changed. The [
▲
] key increases the value, the [
▼
] key decreases the value.
7. Press the [Cancel] key to disregard the change, or press the [OK] key to accept the change and enter the new setting.
7.1.4 Changing a Text Value
If the selected parameter is a text value, it can be changed by using the
up/down navigation keys.
The up key increases the value, and the down key decreases the value.
Place the cursor on the value to be saved and press [OK].
Figure 7.9: Display example.
7.1.5 Changing a Group of Numeric Data Values
If the chosen parameter represents a numeric data value, change the
chosen data value by means of the [◄] and [►] navigation keys as well
as the up/down [
▲
] [
▼
] navigation keys. Use the ◄] and [►] navigation
keys to move the cursor horizontally.
Figure 7.10: Display example.
VLT
®
HVAC Drive Instruction Manual
7 How to Program the Adjustable Frequency
Drive
MG.11.AB.22 - VLT
®
is a registered Danfoss trademark 7-5
7

Danfoss VLT HVACDrive Specifications

General

Brand	Danfoss
Model	VLT HVACDrive
Category	DC Drives
Language	English