Danfoss VLT HVACDrive User Manual

Figure 4.6: Then mount line power plug and tighten wires.
Figure 4.7: Finally, tighten support bracket on line power wires.
NOTE!
With single phase A3 use L1 and L2 terminals.
VLT
®
HVAC Drive Instruction Manual 4 Electrical Installation
MG.11.AB.22 - VLT
®
is a registered Danfoss trademark 4-11
4

Danfoss VLT HVACDrive Specifications

General

Brand	Danfoss
Model	VLT HVACDrive
Category	DC Drives
Language	English