Page 110
PR-01715 Cover Open
The cover was opened during printing.
Possible Cause: The top cover was not closed securely or was opened
during printing.
Solution: Push down firmly on the front edge of the top cover until it clicks
closed.
If the cover does not close...
• Open the printer and make sure the print ribbon cartridge is installed
correctly.
• Check for any items inside the printer, such as a cleaning roller that is
out of place. Fix any problems that you see.
• Make sure that no cards are stuck in the printer. Remove any cards from
inside the printer.
• Make sure the printhead cartridge is installed correctly. The top cover will
not close if the printhead cartridge is not installed correctly.
• Make sure that nothing outside the printer prevents the cover from
closing.
To Next Page
Loading...
