Page 45
Run diagnostics commands
Begin when the LCD panel shows “Printer Ready” on line 1 of the display. To change settings:
1 Press the Enter key to enter the menu system.
2 Press the Up or Down Arrow key to scroll to “Diagnostics” on line 2.
3 Press the Enter key. You are now in the Diagnostics menu.
Run a printer cleaning card
Tips for Success
• Run a printer cleaning card to remove dirt or debris from inside the printer. The card will remove debris from
the print area, duplex units, and laminator(s).
• Run a cleaning card when you load a new roll of print ribbon.
• Run a cleaning card when help for a message or card appearance troubleshooting instructs you to do so. A
cleaning card is often the first and best solution for solving problems.
To Next Page
Loading...
