Page 113
PR-01720 Ribbon Error
The print ribbon index mark was not found.
Possible Cause 1: The print ribbon is not installed correctly.
Solution 1: Remove and reinstall the print ribbon. Make sure the print ribbon
cartridge is fully seated.
Possible Cause 2: The print ribbon is folded on the take-up spool.
Solution 2: Remove and re-install the print ribbon on the cartridge; cut the
print ribbon, removed used ribbon from the take-up spool, and fasten the cut
end of the ribbon to the empty take-up spool.
Tips for success
• Make sure the printhead cartridge is seated correctly in the cover arm.
• Make sure the reflective label on the printhead is not dirty. Clean it with a
soft cloth if needed.
• You might have moved the print ribbon while the printer power was off.
The next card will print correctly. The printer is designed to allow you to
fix problems while the printer power is on.
If you cannot fix the problem, contact your service provider for assistance.
Related Topics:
"Loading print ribbon" on page 7
To Next Page
Loading...
Need help?
General
