Page 51
Site requirements
Operating environment
• Relative humidity: 20% to 80% non-condensing
• Temperature: 60° F to 95° F (15° C to 35° C)
Electrical requirements
• The power supply is rated at 100-240 VAC, 50-60 Hz, 5.4
amp. (It adjusts to any power within this range.)
• Single phase, 3-wire, grounded receptacle only.
Physical requirements
• The printer weighs less than 30 pounds (13.6 kg). The
weight depends on the supplies and options installed.
• Printer dimensions are 23.1 inches (587 mm) long and 9.9
inches (251 mm) wide. With the 100-card input hopper, the
printer is 18.8 inches (478 mm) high and with the 200-card
hopper, it is 21.3 inches (541mm) high.
• The clearance required 9.5 inches (241 mm) at the back, 2
inches (51 mm) on the left side, and 10.5 inches (267 mm)
above the printer latch to open the cover.
To Next Page
Loading...
Need help?
General
