Page 22
11 Discard the used cleaning card and used sleeve.
12 Place a new cleaning sleeve on the spindle (1).
13 Remove the protective cover from the sleeve (2).
14 Insert the cleaning roller (with a new cleaning sleeve) into the
printer (3).
15 Replace the ribbon cartridge, close the printer cover, load cards,
and resume printing.
Cleaning tips
• Use the cleaning card as soon as you open the package. The
cleaning solution on the card evaporates after a few minutes.
• Some card features, such as signature panels and magnetic
stripes, can require more frequent cleaning of the printer.
• Printing with monochrome print ribbons requires more frequent
cleaning.
• Clean printer rollers regularly, such as every time you change
the ribbon.
• If you use StickICards™, use a cleaning card after every 100
cards. The printer might also need additional cleaning.
• You can also use the LCD panel to run the cleaning card. See
"Run a printer cleaning card" on page 45.
• See SP Series Info Central for more cleaning information.
1
2
3
To Next Page
Loading...
