Chapter 1. General Recommendation
1.1. Before the Installation
"Before the installation, read the entire manual attentively."
"The installation of any electric equipment must be in accordance with the current law in the place
where this equipment will be installed. This includes adequate devices of protection, sizing and protection
to the capacities of the equipment."
"Always observe the instructions of security during the installation, operation or maintenance of
this product. Installation, adjustment or maintenance must be carried through only by qualified, trained
and authorized people."
"The power supply, where the supply cable is connected, must be positioned near the equipment
and be on an easily accessible location, because the equipment is turned on and off through it."
"Follow intently every guidance included in this manual. In case of doubts, please contact the
authorized technical support."
"All slots that are not occupied with boards must be closed with a blank panel. Thus, you avoid the
exposure to the energized parts inside the equipment. This procedure must be performed only by a trained
and authorized person."
"When installing the equipment, always tighten screws and knurling screws until the end of their
thread and until they are completely tightened."
"The described equipment in this manual is sensible to the static electricity. Before handling
any equipment described in this manual, verify if the devices of protection against static electricity are
functioning correctly."
1
To Next Page
Loading...
Need help?
General
