Datacom DM4000 Series - System Status Leds; Software and Hardware Features; Software; Eth2 X10 Gx H Series Port Status Leds

Chapter 19. DM4000 ETH2x10GX H Series
19.3. System Status LEDs
The DM4000 ETH2x10GX H Series has the following port status LEDs.
Table 19-1. ETH2x10GX H Series Port Status LEDs
LED CONDITION STATUS
Link/Act ON/Blinking Connection established. Blinking indicates port
activity.
OFF No connection established.
Laser TX On ON Indicates that XFP TX laser is on.
OFF Indicates that XFP TX laser is off.
19.4. Software and Hardware Features
19.4.1. Software
Software information is available in a separated guide.
76