Chapter 20. DM4000 ETH4x10GX H Series
20.3. System Status LEDs
The DM4000 ETH4x10GX H Series has the following port status LEDs.
Table 20-1. ETH4x10GX H Series Port Status LEDs
LED CONDITION STATUS
Link/Act ON/Blinking Connection established. Blinking indicates port
activity.
OFF No connection established.
10/100/1000 ON Indicates that a 10/100Mbps connection was
established.
OFF Indicates that a 1000Mbps connection was
established.
Laser TX On ON Indicates that XFP TX laser is on.
OFF Indicates that XFP TX laser is off.
20.4. Software and Hardware Features
20.4.1. Software
Software information is available in a separated guide.
80
To Next Page
Loading...
Need help?
General
