Chapter 14. DM4000 ETH2x10GX
CAUTION:
"Risk of explosion if battery is replaced by an incorrect type. Use only cell type CR2032. Dispose of used
batteries according with local regulations."
14.2. Front Panel Description
DM4000 ETH2x10GX front panel contains 2 XFP ports and port status LEDs.
Figure 14-2. DM4000 ETH2x10GX - Front Panel
WARNING:
"When performing installation and maintenance operations of optical fibers, you should not stand close
or look directly into the fiber outlet with unaided eyes."
WARNING:
"Electrostatic generated by human body may damage the electrostatic sensitive components on the equip-
ment."
WARNING:
"This interface board supports a 3.15A fuse, type T (delay), 250V. If necessary, replace it only for another
one of the same type and value."
55
To Next Page
Loading...
Need help?
General
