Datacom DM4000 Series User Manual

Chapter 2. Introduction
• DM4000 ETH2x10GX H Series - Hot swappable 2 ports 10 Gigabit XFP interface board.
• DM4000 ETH24GT - Hot swappable 24 ports 10/100/1000Base-T Ethernet switch interface board.
• DM4000 ETH48GT - Hot swappable 48 ports 10/100/1000Base-T Ethernet switch interface board.
• DM4000 ETH48GX H Series - Hot swappable 48 ports SFP Gigabit Ethernet switch interface board.
SFPs are 100Base-FX, 1000Base-X and SGMII compatible.
• DM4000 ETH4x10GX H Series - Hot swappable 4 ports 10 Gigabit XFP interface board.
MPUs (Main Processor Unit) available in DM4000 Series:
• DM4000 MPU192 - Non-blocking, redundant and hot swappable Main Processor Unit, capable of
switching 192Gbit/s of data.
• DM4000 MPU384 - Non-blocking, redundant and hot swappable Main Processor Unit, capable of
switching 384Gbit/s of data.
• DM4000 MPU416 - Non-blocking, redundant and hot swappable Main Processor Unit, capable of
switching 416Gbit/s of data.
FAN interfaces available in DM4000 Series:
• DM4004 FAN - Hot swappable FAN module for DM4004 Chassis 19".
• DM4004 23" FAN - Hot swappable FAN module for DM4004 Chassis 23".
• DM4008 FAN - Hot swappable FAN module for DM4008 Chassis.
GPC available in DM4000 Series:
• DM4000 GPC-OAB - Hot swappable optical booster amplifier.
• DM4000 GPC-OAP - Hot swappable optical pre-amplifier.
• DM4000 GPC-DCM - Hot swappable Dispersion Compensation Module.
Some combinations of Interface Boards and MPUs are unsupported due to the system internal architecture.
These combinations are listed bellow:
• DM4000 ETH2x10GX using a MPU192 in a DM4008 Chassis
• DM4000 ETH24GX using a MPU192 in a DM4008 Chassis
5

Datacom DM4000 Series Specifications

General

Brand	Datacom
Model	DM4000 Series
Category	Network Router
Language	English