OBJECT DETECTION
PRODUCT REFERENCE GUIDE
109
Table Entry Timeout (min)
Enter the amount of time the SBS Condition will be ignored.
View Auto Learn Table
Click the View Auto Learn Table button and the following table is revealed.
GPIN Override Settings
GPIN Override
Select Enabled or Disabled from the drop-down. If Enabled, the GPIN Override allows for a
relay input, which when activated, overrides the camera option to filter bar codes for
determining SBS conditions.
GPIN Active State
Select Active Low or Active High from the drop-down. This defines which state will activate the
relay.
To Next Page
Loading...
