Datalogic AV900 - AV500 Device Settings

E-GENIUS
170 AV500/AV900 2D CAMERA
AV500 DEVICE SETTINGS
Use the Device Settings menu during initial setup to configure device specific settings. If
necessary, you can later make modifications to the device settings using the same menu
selections, including:
“Device Information | Camera #n” on page 172
“Device Settings | Camera #n | Mounting” on page 174
“Understanding PackTrack” on page 171
“PackTrack Calibration Wizard” on page 179
“Device Settings | Camera #n | Imaging” on page 186
“Imaging Calibration Wizard” on page 193
“Subregion Wizard” on page 200
“Device Settings | Camera #n | Digital IO” on page 202
“Device Settings | Camera #n | Serial Port” on page 206
“Device Settings | Camera #n | Ethernet” on page 208
“Device Settings | Camera #n | Logging” on page 211