INTRODUCTION
6
AV500/AV900 2D CAMERA
Applications
The AV500/AV900 cameras are specifically designed for industrial applications requiring
high reading performance such as:
• Low aspect ratio barcodes
• Codes covered by plastic film
• Codes located within a large depth of field
• Codes within a wide field of view
• High resolution codes positioned at far distances from the barcode reader
• Fast moving objects
The AV500/AV900 is designed for multi-head arrays
, single side or multi side tunnels
and hybrid configurations. It can also be used as a stand alone unit.
Stand Alone Presentation Scanning
Manual Presentation Scanning
In Manual Material Handling or Parcel Scanning applications, manual presentation scan-
ning is often the preferred method for item identification. Maximum productivity and
operational e
fficiency is maintained, while the stationary overhead reader continuously
scans the working area, the operator can easily and quickly handle objects of various
dimensions and weights. Since no point-and-shot is required for scanning, no extra tools
or infrastructure is necessary in the working area; no extra operations for part identifi-
cation other than passing the object through the scanning zone. No training is required
f
o
r user
s. Th
e large coverage area and fast acquisition rate – by AV500/AV900 – permits
rapidly handling objects in sequence with great tolerance. White illumination and con-
tinuous high power mode enable top pe
rformance with the maximum comfort for
operators.
A controller key is required!
To Next Page
Loading...
