Datalogic DS8100 Installation Manual

DS8100
48
5
5 MAINTENANCE
5.1 CLEANING
Clean the laser beam output window (Figure A and Figure B, 1) periodically for
correct operation of the reader.
Dust, dirt, etc. on the window may alter the reading performance.
Repeat the operation frequently in particularly dirty environments.
Use soft material and alcohol to clean the window and avoid any abrasive
substances.
WARNING
Clean the window of the DS8100 when the scanner is turned off or
at least when the laser beam is not active.

Datalogic DS8100 Specifications

General

Brand	Datalogic
Model	DS8100
Category	Barcode Reader
Language	English