Code 128
Product Reference Guide
119
Code 128 — continued
Code 128 Length 1, Length 2 Programming Instructions
1. Scan the START barcode.
2. Scan either the Set Length 1 or Set Length 2 barcode.
3. Turn to
Appendix C, Alpha-Numeric Pad and scan the two digits (zero padded) representing
the length in decimal notation.
4. Scan the END barcode.
Code 128 Conversion to Code 39
Enables/disables expansion of Code 128 labels to Code 39.
NOTE
For Code 128 barcodes, only the data charac-
ters are included in the length calculations.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 80
START / END
PROGRAMMING BARCODES
Disable
DEFAULT
Enable
To Next Page
Loading...
