Datalogic Magellan 1100i

Symbologies
120 Magellan
TM
1100i
Code 128 — continued
Code 128 Stitching
Enables/disables stitching for Code 128 labels. When parts of a Code 128 barcode are presented
to the scanner with this feature enabled, the barcode parts will be assembled by the scanner’s
software, and the data will be decoded if all barcode proofing requirements are met.
Minimum Reads
This feature specifies the minimum number of consecutive times a Code 128 label must be
decoded before it is accepted as good read.
START / END
PROGRAMMING BARCODES
Disable Code 128 Stitching
DEFAULT
Enable Code 128 Stitching
START / END
PROGRAMMING BARCODES
Minimum = 1 Read
DEFAULT
Minimum = 2 Reads
Minimum = 3 Reads
Minimum = 4 Reads