2D Symbologies
160
Magellan
TM
1100i
Datamatrix — continued
Datamatrix Length 1, Length 2 Programming Instructions
1. Scan the START barcode.
2. Scan either the Set Length 1 or Set Length 2 barcode.
3. Turn to
Alpha-Numeric Pad and scan the four digits (zero-padded) representing the length.
Scan the END barcode.
NOTE
For Datamatrix barcodes, only the data characters are included in the
length calculations.
Any value set higher than 800 will be considered to be 800.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 0800
To Next Page
Loading...
