LED and Beeper Indicators
Product Reference Guide
13
LED and Beeper Indicators
Power On Alert
Disables or enables the indication (a single beep) that the scanner has finished all its power up
tests and is now ready for operation.
ERI Active State High
This setting specifies the active-state polarity of the External Read Indicator signal to High; the
inactive state is the opposite polarity.
START / END
PROGRAMMING BARCODES
Disable
Enable
DEFAULT
NOTE
Contact Technical Support for assistance in
changing the ERI Active State to Low if needed.
Configuration of this feature is available only
through use of a special cable.
START / END
PROGRAMMING BARCODES
ERI Active State = High
To Next Page
Loading...
