Datalogic Matrix 210N - Restore Defaults; Restore Default Startup Configuration

MATRIX 210N™ REFERENCE MANUAL
130
7
7.6 RESTORE DEFAULTS
The device parameters are divided into two main classes, Configuration and Environment
which are affected differently by the Restore Defaults commands.
 The Configuration parameters are the ones set in the various steps of the
configuration process and are specific to each application. When multiple
configurations (jobs) are saved on a single device, these parameters can be different
from one configuration to the next.
 Environment parameters regard the device Identity and Position in a Network
(Ethernet, ID-NET, etc.) and are not influenced by the Default (or any other)
Configuration present in memory.
7.6.1 Restore Default Startup Configuration
The Default configuration is always present on the reader and in fact it is not modifiable and
cannot be deleted. It can always be restored by simply selecting it from the Open from
Device configuration list.