RAPID CONFIGURATION
STEP 2 – MOUNT AND POSITION THE READER
1. To mount the Matrix 210N, use the mounting brackets to obtain the most suitable position
for the reader. The most common mounting configuration is shown in the figure below.
Other mounting solutions are provided in par. 3.3.
Figure 4 –Positioning with Mounting Bracket
NOTE: For applications where strong vibration or continuous bumps are
present, it is recommended to use a double mounting bracket solution.
2. When mounting the Matrix 210N take into consideration these three ideal label position
angles: Pitch or Skew 10° to 20° and Tilt 0°, although the reader can read a code at any tilt
angle provided the code fits into the Field Of View (FOV).
Figure 5 – Pitch, Tilt and Skew Angles
3. Refer to the Reading Features table in chp. 6 to determine the distance your reader
should be positioned at.
NOTE: Rapid Configuration of the Matrix 210N reader can be made either
through the X-PRESS™ interface (steps 3 or 4) which requires no PC
connection, or by using the DL.CODE Configuration Program (steps 5-6).
Select the procedure according to your needs.
any angle
inside FOV
To Next Page
Loading...