Datalogic Matrix 210N - VERIFY MASTER;SLAVE SYNCHRONIZED CONFIGURATION

MATRIX 210N™ REFERENCE MANUAL
124
7
7.4.4 Verify Master/Slave Synchronized Configuration
From the Master configuration, run the application and monitor the output data from the
DL.CODE Console or a configured channel terminal.
If necessary, as a troubleshooting tip, you can temporarily apply the Reading Mask field in
place of each Code Content field to verify if all devices are reading. To do this:
1. Connect to the Master device via Ethernet and from the Data Formatting step, change
each Expected Code Field Type from Code Content to Reading Mask.