Datalogic Matrix 210N - Restore Default Environment

SOFTWARE CONFIGURATION
131
7
The same action can be performed from the Device menu >Backup/Restore > Restore
Defaults > Restore Default Startup Configuration. The Default Configuration will be set to
run at startup and the reader will be reset.
Any previously saved configurations on the device will remain in memory, but the Default
configuration is set as the startup configuration.
7.6.2 Restore Default Environment
Restore Default Environment returns all Environment parameters to their factory default
settings. The default IP address will be restored as well as all the parameters managed in the
Device Environment Configuration window.
The Factory Default static IP address for all
Matrix N Family readers is:
IP Address = 192.168.3.100
Any previously saved configurations on the device will remain in memory, but the Default
configuration is set as the startup configuration.