Datalogic PowerScan PD9530 User Manual

Standard Defaults
Product Reference Guide 327
Good Read LED Duration
300 ms 70
Scanning Features
Scan Mode
Trigger Single 71
Stand Mode Indication
Disable 72
Pick Mode
Disable 72
Stand Mode Sensitivity
Medium 73
Stand Mode Illumination Off Time
2 Seconds 73
Scanning Active Time
5 Seconds 74
Stand Illumination Control
OFF 74
Flash On Time
10 = Flash is ON for 1
Second
75
Flash Off Time
06 = Flash is OFF for
600ms
75
Aiming Pointer
Enable 76
Aiming Duration Timer
Aiming Off
After Decoding
76
Green Spot Duration
300 ms 77
Partial Label Reading Control
Enable 77
Decode Negative Image
Disable 78
Multiple Label Reading
Multiple Labels per Frame
Disable 79
Multiple Labels Ordering by Code
Symbology
Random Order 80
Multiple Labels Ordering by Code Length
Disable 80
CODE SELECTION - 1D SYMBOLOGIES
Code EAN/UPC
Coupon Control
Enable only UPCA
coupon decoding
83
UPC-A
UPC-A Enable/Disable
Enable 84
UPC-A Check Character Transmission
Send 84
Expand UPC-A to EAN-13
Don’t Expand 85
UPC-A Number System Character
Transmission
Transmit 85
UPC-A 2D Component
2D Component Not
Required
86
Parameter Default Your Setting
Page
Number

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g