6.1.1 ECU ALARMS (CAN ERROR MESSAGE / DTC)
NOTE: For details on these code meanings, refer to the ECU instructions provided by the
engine manufacturer, or contact the engine manufacturer for further assistance.
NOTE: For further details on connection to electronic engines, refer to DSE Publication:
057-004 Electronic Engines And DSE Wiring
When connected to a suitable CAN engine, the controller displays alarm status messages from the
ECU.
1/1 Alarms
ECU Amber
Warning
Press and hold the Scroll Down
button to access the list of current active Engine DTCs
(Diagnostic Trouble Codes) from the ECU.
The code is interpreted by the module and shows on the display as
a text message. Additionally, the manufacturer’s fault code is
shown below.
Water Level Low
###,###,###
Type of alarm that is
triggered on the DSE
module, e.g. Warning
To Next Page
Loading...
