Fault Description
Maintenance Alarm 1
The module detects that the Maintenance Alarm 1 is due creating
a fault condition, the appropriate LCD message is displayed.
Maintenance Alarm 2
The module detects that the Maintenance Alarm 2 is due creating
a fault condition, the appropriate LCD message is displayed.
Maintenance Alarm 3
The module detects that the Maintenance Alarm 3 is due creating
a fault condition, the appropriate LCD message is displayed.
2130 ID0 Analogue Input E to H
The module detects that an analogue input that has been user
configured to create a fault condition has become active on the
DSE2130 expansion module with ID0.
2130 ID0 Digital Input A to H
The module detects that a digital input that has been user
configured to create a fault condition has become active on the
DSE2130 expansion module with ID0.
2130 ID1 Analogue Input E to H
The module detects that an analogue input that has been user
configured to create a fault condition has become active on the
DSE2130 expansion module with ID1.
2130 ID1 Digital Input A to H
The module detects that a digital input that has been user
configured to create a fault condition has become active on the
DSE2130 expansion module with ID1.
To Next Page
Loading...
