Deif GC-1F - Page 27

GC-1F Installation Instructions and Reference Handbook
DEIF A/S Page 27 of 123
Option X4, additional operator’s panel AOP-2
For wiring details, please refer to ‘Wiring instructions’ in this section.
If option H8 is used together with AOP-2, the total end resistance of the AOP-2
and the external I/O controller must be 120 .
A DC/DC converter for the DC supply voltage and 2 × 1 m cable with an RJ12
plug in one end and stripped wires in the other end are included in the AOP-2
delivery.