Figure 14. Inside the system with Risers + Rear 2 x E3.S module
1. Cooling fan cage assembly
2. Fan power connector
3. Processor
4. Latch mechanism to engage Riser module
5. Guiding mechanism to guide Riser module
6. Riser 3
7. Power Supply Units (PSU 1 and 2)
8. 2 x E3.S drives
9. Riser 2
10. Drive backplane with latch
11. Information Tag
Locating the Express Service Code and Service Tag
The unique Express Service Code and Service Tag are used to identify the system. The information tag is located in the front of
the system that includes system information such as Service Tag, Express Service Code, Manufacture date, NIC, MAC address,
QRL label, and so on. If you have opted for the secure default access to iDRAC, the Information tag also contains the iDRAC
secure default password. If you have opted for iDRAC Quick Sync 2, the Information tag also contains the OpenManage Mobile
(OMM) label, where administrators can configure, monitor, and troubleshoot the PowerEdge servers.
20
System overview
To Next Page
Loading...
