Table 10. PowerEdge R6615 chassis dimensions
Drives Xa Xb Y Za with
bezel
Za without
bezel
Zb Zc
8 drives 482.0 mm (18.97
inches)
434.0 mm
(17.08
inches)
42.8 mm
(1.685
inches)
35.84 mm
(1.4 inches)
With bezel
22.0 mm (0.87
inches) Without
bezel
700.7 mm
(27.58
inches) Ear
to rear wall
736.29 mm
(28.99
inches) Ear
to PSU
handle
4 drives, 10
drives
482.0 mm (18.97
inches)
434.0 mm
(17.08
inches)
42.8 mm
(1.685
inches)
35.84 mm
(1.4 inches)
With bezel
22.0 mm (0.87
inches) Without
bezel
751.48 mm
(29.59
inches) Ear
to rear wall
787.05 mm
(30.99
inches) Ear
to PSU
handle
NOTE: Zb is the nominal rear wall external surface where the system board I/O connectors reside.
System weight
Table 11. PowerEdge R6615 system weight
System configuration Maximum weight (with all drives/SSDs)
A server with fully populated drives 20.2 kg (44.53 lbs)
A server without drives and PSU installed 17.4 kg (38.36 lbs)
Processor specifications
Table 12. PowerEdge R6615 processor specifications 
Supported processor Number of processors supported
AMD EPYC 4
th
 Generation 9004 Series processor One
PSU specifications
The PowerEdge R6615 system supports up to two AC or DC power supply units (PSUs).
Table 13. PSU specifications 
PSU Class Heat
dissipation
(maximum)
(BTU/hr)
Frequenc
y (Hz)
Voltage AC DC Current (A)
High line
wattage
200 V–
240 V
Low line
wattage
100 -120
V
700 W
mixed
mode
Titanium 2625 50/60 200-240 V AC 700 W N/A N/A 4.1
N/A 2625
N/A
240 V DC N/A N/A 700 W 3.4
800 W
mixed
mode
Platinum 3000 50/60 100-240 V AC 800 W 800 W N/A 9.2-4.7
N/A 3000
N/A
240 V DC N/A N/A 800 W 3.8
1100 W DC N/A 4265 N/A -48 - -60 V DC N/A N/A 1100 W 27
1100 W
mixed
mode
Titanium 4125 50/60 100-240 V AC 1100 W 1050 W N/A 12-6.3
N/A 4125
N/A
240 V DC N/A N/A 1100 W 5.2
Technical specifications 25