Table 43. Processor Settings details(continued)
Option Description
Configurable TDP Allows the reconfiguration of the processor Thermal Design
Power (TDP) levels based on the power and thermal delivery
capabilities of the system. TDP refers to the maximum amount
of power the cooling system is required to dissipate. This
option is set to Maximum by default.
NOTE: This option is only available on certain SKUs of the
processors, and the number of alternative levels varies as
well.
x2APIC Mode Enables or disables x2APIC mode. This option is set to
Enabled by default.
NOTE: For two CPU 64 cores configuration, x2APIC
mode is not switchable if 256 threads are enabled (BIOS
settings: All CCD, cores, and logical processors enabled).
Number of CCDs per Processor Controls the number of enabled CCDs in each processor. This
option is set to All by default.
Number of Cores per CCD Specifies the number of cores per CCD. This option is set to
All by default.
Processor Core Speed Specifies the maximum core frequency of the processor.
Processor n
NOTE: Depending on the number of CPUs, there might be
up to n processors listed.
The following settings are displayed for each processor that is
installed in the
system:
Table 44. Processor n details
Option Description
Family-Model-Stepping Specifies the family, model, and stepping of the processor as
defined by AMD.
Brand Specifies the brand name.
Level 2 Cache Specifies the total L2 cache.
Level 3 Cache Specifies the total L3 cache.
Number of Cores Specifies the number of cores per processor.
Microcode Specifies the processor microcode version.
SATA Settings
To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >
SATA Settings.
Table 45. SATA Settings details
Option Description
Embedded SATA Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes.
This option is set to AHCI Mode by default.
NOTE:
1. You might also need to change the Boot Mode setting to UEFI. Otherwise, you
should set the field to Non-RAID mode.
2. No ESXi and Ubuntu OS support under RAID mode.
Pre-operating system management applications 45
To Next Page
Loading...
