Upgrade Kits
The table lists the available After Point Of Sale [APOS] kits.
Table 100. Upgrade kits
Kits Related links to service instructions
Bezel See Installing the front bezel
M.2 SSD See Installing the M.2 SSD module
BOSS-N1 See Installing the BOSS-N1 controller card module
Drives See Installing the drive
Memory See Installing a memory module
Network cards (Standard PCIe adapter
LP/FH)
See Installing the LOM card and rear I/O board
Network cards (OCP) See Installing the OCP card
PCIe SSD card See Installing the drive
Power cords N/A
Power supplies See Installing a power supply unit
Quick sync N/A
TPM See Upgrading the Trusted Platform Module
Processor enablement thermal kits See Installing the processor
Internal USB 3.0 card See Internal USB card kit
Serial COM port daughter card See Installing the serial COM port
VGA port for Direct Liquid Cooling system See Installing the VGA port
Cables N/A
Fans See Installing a fan
Heat sink See Installing a processor heat sink module or Direct Liquid Cooling Module
Risers See Installing the expansion riser
Rail N/A
CMA N/A
Topics:
• BOSS-N1 module kit
• Data Processing Unit (DPU) kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 SSDs.
NOTE:
To enable the BOSS-N1 module in the system, ensure that the BIOS firmware version is 1.5.5 and iDRAC firmware
version is 4.30.30.30 or later.
8
Upgrade Kits 199
To Next Page
Loading...
