Dell PowerEdge R6615 9JNDF - System health and system ID indicator codes

Table 107. Status LED indicators and descriptions(continued)
Icon Description Condition Corrective action
If the problem persists, see the
Getting help section.
NOTE: For more information about the
supported PCIe cards, see the Expansion cards
and expansion card risers > Expansion card
installation guidelines section.
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of the system.
Figure 181. System health and system ID indicator
Table 108. System health and system ID indicator codes
System health and system ID indicator code Condition
Solid blue Indicates that the system is powered on, is healthy, and
system ID mode is not active. Press the system health and
system ID button to switch to system ID mode.
Blinking blue Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Solid amber Indicates that the system is in fail-safe mode. If the problem
persists, see the Getting help section.
Blinking amber Indicates that the system is experiencing a fault. Check
the System Event Log for specific error messages. For
System diagnostics and indicator codes 211