3
In the
Display Settings
window, click
the monitor 2
icon, click
the
Extend the desktop onto
this
monitor
check box, and then click
Apply
.
4
Click
OK
to
close
the
Display Settings
window.
To
disable extended desktop
mode:
1
In the
Display Settings
window, click
the
Settings
tab.
2
Click the monitor 2
icon, uncheck
the
Extend the desktop onto this monitor
option, and then
click
Apply
.
Using an External Monitor as Your Primary Display:
Swapping
Primary and Secondary
Displays
To
swap your primary and secondary display designations
(for
example,
to
use your external
monitor
as
your primary display
after
docking), perform
the
steps
in the following
section
that
corresponds
to the
operating system your computer is
using.
®
Microsoft
Windows
®
XP
1
Click the
Start
button
and click
Control
P
a
nel
.
2 Under
Pick a
category
, click
Appearance and
Th
em
es
.
3 Under
Pick a task...
,
click
the
area you want
to
change,
or
under
or pick a Control Panel icon
, click
Display
.
4
Click the
Settings
tab→
Advanced
→
Displays
tab.
Windows
V
i
sta®
1
Click the
Windows V
i
sta
Start
button, ,
and click
Control
P
a
nel
.
2 Under
Appearance and Personalization
,
click
Adjust screen
resolution
.
3
In the
Display Settings
window, click
the monitor 2
icon, click
the
This is my main monitor
check
box, and then click
Apply
.
4
Click
OK
to
close
the
Display Settings
window.
Using the Ambient Light
Sensor
The
ambient
light
sensor is located
on the front of the
computer display.
The
sensor detects
available
environmental
light
and automatically
increases
or
decreases
the
display backlighting
to
compensate
for
low-light
and
high-light environments.
You can enable
or
disable
the
ambient
light
sensor feature by pressing
the
<Fn>
and left-arrow k
e
y
combination.
NOTE:
Do not cover the ambient light sensor with any adhesive labels.
If
covered up, the
sensor—when
enabled—automatically sets the display brightness to the minimum
level.
46
Using the
Display
To Next Page
Loading...
