Dell™ Printer Configuration Web Tool
119
IPv6 Enable Stateless
Address
Select the check box to enable the stateless address.
Use Manual Address Select the check box to set the IP address manually.
Get IP Address from
DHCP
Allows you to enable or disable the automatic setting of the IP
address via DHCP.
Manual Address Sets the IP address. To specify an IPv6 address, enter the
address followed by a slash (/) and then "64". For details,
consult your system administrator.
Manual Gateway
Address
Sets the gateway address.
DNS DNS Domain Name Sets the DNS domain name.
IPv4 Get DNS Server
Address from DHCP
Allows you to enable or disable the automatic setting of the
DNS server address via DHCP.
Manual DNS Server
Address
Manually sets the DNS server address in xxx.xxx.xxx.xxx
format when Get DNS Server Address from DHCP is not
selected.
IPv6 Get DNS Server
Address from DHCPv6-
lite
Select the check box to get the DNS server address
automatically from the DHCPv6-lite server.
Manual DNS Server
Address
Sets the DNS server address.
DNS Dynamic
Update (IPv4)
Select the check box to enable dynamic updates to DNS.
DNS Dynamic
Update (IPv6)
Select the check box to enable dynamic updates to DNS.
Auto Generate
Search List
Select the check box to automatically generate the search list.
Search Domain
Name
Sets the search domain name. Up to 255 alphanumeric characters, periods, and hyphens
can be used. If you need to specify more than one domain name, separate them using a
comma or semicolon.
Time-out Sets the time-out period between 1 and 60 seconds.
Priority to IPv6 DNS
Name Resolution
Select the check box to enable the DNS Name Resolution feature.
WINS WINS Mode Allows you to enable or disable the automatic setting of the primary and secondary
WINS server addresses via DHCP.
WINS Primary Server Manually sets the primary WINS server address in xxx.xxx.xxx.xxx format when WINS
Mode is not selected.
WINS Secondary
Server
Manually sets the secondary (backup) WINS server address in xxx.xxx.xxx.xxx format
when WINS Mode is not selected.
LPD Connection Time-
Out
Sets the connection time-out period from 1 to 3,600 seconds.
IP Filter (IPv4) Click IP Filter (IPv4) to set the IP Filter settings on the IP Filter (IPv4) page.
Port9100 Port Number Sets the port number from 9000 to 9999.
Connection Time-
Out
Sets the connection time-out period between 1 and 1,000 seconds.
IP Filter (IPv4) Click IP Filter (IPv4) to set the IP filter settings on the IP Filter (IPv4) page.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
