Dell S2810dn

292 Troubleshooting Guide
Toner smears or print comes off
6 Stir the developer in the drum cartridge.
a Press the ( Menu ) button and select
Admin Settings  Maintenance  Clean
Developer
.
b After you stir the developer in the drum cartridge, Press the
(
Menu ) button.
c Select Report/List  Demo Page .
The demo page is printed.
Does this solve your problem?
The task is complete. Go to action 7.
7 Clean the toner in the drum cartridge.
a Press the ( Menu ) button and select
Admin Settings  Maintenance  Toner
Refresh
.
NOTE: Toner Refresh feature uses the toner, and shorten the
life of the toner cartridge and the drum cartridge.
b After you refresh the toner in the drum cartridge, Press the
(
Menu ) button.
c Select Report/List  Demo Page .
The demo page is printed.
Does this solve your problem?
The task is complete. Go to action 8.
8 Replace the drum cartridge.
a Replace the drum cartridge. See "Replacing the Drum Cartridge."
b After you replace the drum cartridge, Press the
(
Menu ) button.
c Select Report/List  Demo Page .
The demo page is printed.
Does this solve your problem?
The task is complete. Contact Dell.
Action Yes No
1
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the General tab, change the Paper Type setting.
Does this solve your problem?
The task is complete. Go to action 2.
Action Yes No