Dell S2810dn

72 Installing Printer Drivers on Windows
®
Computers
12 If you do not share your printer, select Do not share this printer . If you share your printer, select Share this printer
so that others on your network can find and use it
. Click Next .
13 As the driver installation is completed, click Print a test page to verify installation. To use this printer as the default
printer, select the
Set as the default printer check box.
14 Click Finish .
Network Connection Setup
For installing PCL and PS printer driver
1 Start the Dell Printer Easy Install program, following the procedures shown in "Starting Dell Printer Easy Install."
2 In the main menu window of Dell Printer Easy Install , click Connect .
3 Select Wireless or Ethernet Connection , and then click Next .
4 Select the printer you want to install from the printer list, and then click Next . If the target printer is not displayed
on the list, click the (Refresh) button to refresh the list or click
add printer manually to add a printer to the list
manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select the
I am setting up this printer on a server check
box.
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a valid IP
address.