Dell S2810dn

Installing Printer Drivers on Windows
®
Computers 71
Windows
®
7, Windows
®
7 64-bit Edition, or Windows Server
®
2008 R2
1
Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS-V3_S2810dn.zip (where D is the drive letter of the optical drive)
2 Click Start  Devices and Printers .
3 Click Add a printer .
When you use Windows Server
®
2008 R2, click Add a local or network printer as an administrator .
If the
User Account Control dialog box appears, click Yes .
NOTE: If you are an administrator on the computer, click Yes; otherwise, contact your administrator to continue the desired
action.
4 Click Add a local printer .
5 Select the port connected to this product, and then click Next .
6 Click Have Disk to display the Install From Disk dialog box.
7 Click Browse , and then select the extracted folder in step 1.
8 Click OK .
9 Select your printer name and click Next .
10 To change the printer name, enter the printer name in the Printer name box, and then click Next .
To use this printer as the default printer, select the
Set as the default printer check box, and then click Next .
11 If you do not share your printer, select Do not share this printer . If you share your printer, select Share this printer
so that others on your network can find and use it
.
12 Click Next .
Installation starts.
13 As the driver installation is completed, click Print a test page to verify installation.
14 Click Finish .
Windows
®
8, Windows
®
8 64-bit Edition, Windows
®
8.1, Windows
®
8.1 64-bit Edition, Windows Server
®
2012,
or Windows Server
®
2012 R2
1
Extract the zip file you downloaded to your desired location.
D:\Drivers\XPS\Win_8\XPS-V4_S2810dn.zip (where D is the drive letter of the optical drive)
2 On the Desktop screen, right-click the bottom left corner of the screen, and then click Control Panel .
3 Click Hardware and Sound ( Hardware for Windows Server
®
2012/Windows Server
®
2012 R2)  Devices and
Printers
 Add a printer .
4 Click The printer that I want isn’t listed .
5 Select Add a local printer or network printer with manual settings , and then click Next .
6 Select the port connected to your printer, and then click Next .
7 Click Have Disk to display the Install From Disk dialog box.
8 Click Browse , and then select the extracted folder in step 1.
9 Click OK .
10 Select your printer name and click Next .
11 To change the printer name, enter the printer name in the Printer name box, and then click Next . Installation
starts.