Dell S2810dn

164 Understanding the Printer Menus
Va lu e s:
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
NOTE: An incorrect altitude setting leads to poor printing quality, incorrect indication of remaining toner, etc.
Va lu e s:
StaticMemory Ctr
Purpose:
To widen the print gap not to leave toner streak on the next page.
Va lu e s:
Ghost Control
Purpose:
To reduce negative ghost.
Va lu e s:
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being
changed accidentally.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
"Panel Lock"
Panel Lock
Purpose:
To set a limited access to Admin Settings with a password, and to set or change the password.
Off
*
Does not use toner cartridge of another manufacturer.
On
Uses toner cartridge of another manufacturer.
0m
*
Sets the altitude of the location where the printer is installed.
1000m
2000m
3000m
Off
*
Does not widen the print gap.
On Widens the print gap.
Off
*
Does not decrease negative ghosting.
On Decreases negative ghosting.