Dell S2810dn

126 Dell™ Printer Configuration Web Tool
Wi-Fi Direct
NOTE: Wi-Fi Direct feature is available only when the wireless adapter is connected.
Purpose:
To configure the detailed setting of the Wi-Fi Direct connection.
Va lu e s:
Mixed Mode PSK
*1, 2
Sets the Mixed Mode PSK to use through the
wireless network. Mixed Mode PSK
automatically selects the encryption type
from either WPA-PSK TKIP, WPA-PSK AES,
or WPA2-PSK AES.
Mixed Mode
Enterprise
*2, 3
Sets the Mixed Mode Enterprise to use
through the wireless network. Mixed Mode
Enterprise automatically selects the
encryption type from either WPA-Enterprise
TKIP, WPA-Enterprise AES, or WPA2-
Enterprise AES.
WEP Encryption Select the WEP key code from either Hex or Ascii.
WEP Key 1 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 1 Enters the WEP key 1 again to confirm it.
WEP Key 2 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 2 Enters the WEP key 2 again to confirm it.
WEP Key 3 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 3 Enters the WEP key 3 again to confirm it.
WEP Key 4 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 4 Enters the WEP key 4 again to confirm it.
Transmit Key
*5
/Key Sets the transmit key type from the list.
WPA-PSK Passphrase/Key Sets the passphrase.
Re-enter Passphrase/Key Enters the passphrase again to confirm it.
WPA-Enterprise
*4
EAP-Identity Sets the EAP-Identity for the authentication.
Authentication Method Shows the authentication method.
Login Name Sets the login name for the authentication.
Password Sets the password.
Re-enter Password Enters the password again to confirm it.
*1
For encryption, AES or TKIP method is used.
*2
This item is available only when Infrastructure is selected for Network Type.
*3
For authentication and encryption by digital certificate, AES or TKIP method is used.
*4
To activate the setting, import a certificate which supports wireless LAN (server/client) on the SSL/TLS pages, and enable the relevant
certificate in advance.
*5
When Auto is selected for Transmit Key, the key set specified for WEP Key 1 is used.
Wi-Fi Direct Wi-Fi Direct Displays whether to enable the Wi-Fi Direct connection.