Dell S2810dn

140 Understanding the Printer Menus
Font Size
Purpose:
To specify the font size for scalable typographic fonts.
Va lu e s:
Font size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
NOTE: The Font Size menu is only displayed for typographic fonts.
Font Pitch
Purpose:
To specify the font pitch for scalable mono spaced fonts.
Va lu e s:
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For non-scalable mono spaced
fonts, the pitch is displayed, but cannot be changed.
NOTE: The Font Pitch menu is only displayed for fixed or mono spaced fonts.
Form Line
Purpose:
To set the number of lines in a page.
Va lu e s:
mm series
inch series
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and
Orientation menu items. Select the correct Orientation before changing Form Line.
See also:
"Orientation"
12.00
*
Sets the values in increments of 0.25.
Available Range: 4.00 – 50.00
10.00
*
Sets the value in increments of 0.01.
Available Range: 6.00–24.00
60
*1
Sets the value in increments of 1.
Available Range: 5–128
*1
Denotes country-specific factory default values.
60
*1
Sets the value in increments of 1.
Available Range: 5–128
*1
Denotes country-specific factory default values.