146
Understanding the Printer Menus
Wi-Fi Setup
Purpose:
To configure the wireless network interface.
Va lu e s:
Select access Select the access point from the list.
WEP Key Entry When you select an access point using WEP as the security
method, enter the WEP key. For 64bit keys, up to 10
hexadecimal characters can be entered. For 128bit keys, up
to 26 hexadecimal characters can be entered.
Passphrase Entry When you select an access point using WPA, WPA2, or
Mixed as the encryption type, enter the passphrase of 8 to
63 alphanumeric characters.
Manual Setup Enter Network (SSID) Specifies a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.
Infrastructure Select when you configure the wireless settings through the
access point such as a wireless router.
No Security Specifies No Security to configure the wireless settings
without specifying an encryption type from WEP, WPA-
PSK-TKIP, and WPA-PSK-AES.
Mixed mode PSK
*
Select to configure the wireless setting with the encryption
type of Mixed mode PSK. Mixed mode PSK automatically
selects the encryption type from either WPA-PSK-TKIP,
WPA-PSK-AES, or WPA2-PSK-AES.
Passphrase
Entry
Specifies the passphrase of
alphanumeric characters from 8 to 63.
WPA2-PSK-AES Select to configure the wireless settings with the encryption
type of WPA2-PSK-AES.
PassPhrase
Entry
Specifies the passphrase of
alphanumeric characters from 8 to 63.
(hex: 0-9, a-f, A-F, 16 to 64 characters)
WEP Specifies the WEP key to use through the wireless network.
For 64bit keys, up to 10 hexadecimal characters can be
entered. For 128bit keys, up to 26 hexadecimal characters
can be entered.
Transmit Key Specifies the transmit key from Auto
*
,
WEP Key 1, WEP Key 2, WEP Key 3,
and WEP Key 4.
Ad-hoc Select to configure the wireless settings without the access
point such as a wireless router.
No Security
*
Select to configure the wireless settings without specifying
the encryption type from WEP.
WEP Specifies the WEP key to use through the wireless network.
For 64bit keys, up to 10 hexadecimal characters can be
entered. For 128bit keys, up to 26 hexadecimal characters
can be entered.
Transmit Key Specifies the transmit key from WEP
Key 1
*
, WEP Key 2, WEP Key 3, and
WEP Key 4.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
