Delta ASD-A2-7543 Series - Parameter Setting Procedure

To Next Page

To Previous Page

ASDA-A2 Chapter 4 Panel Display and Operation

4-2 Revision February, 2017

4.2 Parameter Setting Procedure

Switch the mode:

Parameter

Mode

Monitoring

Mode

Alarm Mode

Power On

1. If no alarm occurs, then the Alarm Mode will be skipped.

2. When new alarm occurs, it will switch to Alarm Mode in

any conditions.

3. When switching to the other modes, if there is no Key to

be selected for 20 seconds, it will return to the Alarm Mode

automatically.

Please refer to Chapter 10 for detailed alarm description.

MODE

Please refer to Chapter 8 for parameters

Please refer to section 7.2.1

Operate in each mode:

Monitoring mode

Other manuals for Delta ASD-A2-7543 Series