Easy Setup and Operation
13
Placing the speakers.
Connecting the speakers.
Connecting a monitor and a
DVD player.
Starting the Auto Setup.
Playing a DVD with surround
sound.
Connecting a microphone.
Preliminary measurement.
The measurement of the speakers in the main listening position.
The measurement of the speakers in the 2nd to 8th listening
position.
Check of the measurement result.
1) Measuring the background noise (noise in the room).
2) Determining whether or not speakers are connected.
3) Checking the polarities of the speakers.
1) Speaker Configuration
2) Delay Time
3) Channel Level
4) Crossover Frequency
5) Room EQ
Easy to setup flow
Auto setup flow
Store the measurement result in the memory.
• This section contains the basic steps necessary to configure the AVR-4806 according to your listening room environment and
the source equipment and loudspeakers you are using.
• For optimum performance, we recommend using the Auto Setup function.
• If you wish, you can set the various settings manually without using Auto Setup ( page 113 ~ 121).
To Next Page
Loading...
Need help?
General
