Denon AVR-4806 User Manual

63
Basic Operation
5
Press the CURSOR
DD
or
HH
button to select the
“Bass” or “Treble”.
6
Press the CURSOR
FF
or
GG
button to set the
level.
To increase the bass or treble:
The bass or treble sound can be increased to up to +6
dB in steps of 1 dB.
To decrease the bass or treble:
The bass or treble sound can be decreased up to –6 dB
in steps of 1 dB.
8
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
7
Press the ENTER button.
• The surround parameter menu screen re-appears.
2 Tone defeat mode
• If you do not want the bass and treble to be adjusted, turn
on the tone defeat mode.
Press the TONE DEFEAT button to turn on the
“Tone Defeat” mode.
The signals do not pass through the bass and treble
adjustment circuits, providing higher quality sound.
Tone control setting
• Use the tone control setting to adjust the bass and treble as
desired.
• The tone control function will not work in the PURE DIRECT,
DIRECT or Home THX Cinema mode.
2 Adjusting the tone
1
Press the SURROUND PARAMETER button.
• Display the surround parameter menu.
2
Press the CURSOR
DD
or
HH
button to select the
“TONE”.
The screen selected surround mode appears.
3
Press the CURSOR
FF
button.
• Switch to the “Tone Control” screen.
4
Press the CURSOR
GG
button to select the “Tone
Defeat OFF”.

Denon AVR-4806 Specifications

General

Brand	Denon
Model	AVR-4806
Category	Stereo Receiver
Language	English