Press the SURROUND BACK button.
Lights when the Surround Back CH
is on.
53
Basic Operation
w When you would like to play back with the “Dolby Digital
EX” mode, set AFDM to “OFF” and select “MTRX ON”
with “SB CH OUT”.
Example: When playing software that has a Dolby Digital EX
flag
q When AFDM is set to “ON”, the surround mode is
automatically set to the “DOLBY DIGITAL + PL
IIx
CINEMA” mode. The surround parameter screen shown
at the below is displayed.
Dolby Digital mode and DTS Surround
(only with digital input)
1
Press the STANDARD button to select the
“STANDARD (Dolby/DTS Surround)” mode.
2
Play a program source with the ,
mark.
• The Dolby Digital indicator lights
when playing Dolby Digital
sources.
• The DTS indicator lights when
playing DTS sources.
lights
lights
lights
lights
3
Press the SURROUND PARAMETER button.
• Display the “Surround Parameter” menu.
5
Press the CURSOR
FF
or
GG
button to select the
setting.
6
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
4
Press the CURSOR
DD
or
HH
button to select the
parameter.
• When “Default” is selected and the CURSOR
FF
button is
pressed, “CINEMA EQ.” and “D.COMP.” are automatically
turned off, “LFE” is reset, and “TONE” is set to the default
value.
To Next Page
Loading...
Need help?
General
