59
Basic Operation
Memory and call-out functions
(USER MODE function)
• The AVR-4806 is equipped with a function for storing the
selected input source, the auto surround mode and input
mode in the memory and selecting these settings when you
want to use them.
• Three patterns of settings can be stored in the memory
pressing the USER MODE buttons.
1
The following are stored in the memory:
q Currently set input source
w Currently set auto surround mode
e Currently set input mode
2 Storing the settings in the memory
2
Press and hold the USER MODE button at
which you want to store the settings.
In this case, press the button and hold it in until the
indicator of the selected USER MODE button lights.
Press the USER MODE button at which the settings
you want to call out are stored.
• The indicator for the selected USER MODE button lights.
The indicator turns off if you perform any operations that
change the settings stored at the USER MODE buttons.
2 Calling the settings out
To Next Page
Loading...
